Cospas-Sarsat Distress Signal Fixed Receiver (hereafter as Sarsat Beacon Monitor 406 – 406MHz emergency radio beacon monitoring system) is intended for 406MHz emergency radio beacon signals reception, decoding and positioning.

This equipment is meant to be used by seaport services, rescue marine centers, coast guard rescue centers or GMDSS rescue coordination centers. SBM 406 is a wide range ground COSPAS-SARSAT signal receiver which allows to locate emergency rescue signals sent by any 406MHz beacon in local responsibility area. Software support allows to observe distress signals and beacon position data on any PC. 

SBM 406 provides signal monitoring and processing of the following devices: EPIRB, SASS, PLB. 

Effective use

This system has various prospective effective use fields.

Integrated rescue operation facility

The device can be used as integrated rescue operation facility in case of distress to reduce the rescue operation time.

System reduce the emergency signal reception and processing time in coast guard rescue service responsibility local zone and, by means of AIS system integration, displays the received signal with distress positioning on PC. In such a case operator quickly observes the nearest vessel in local zone that is able to render assistance and requests for help.

The emergency signal will received directly and immediately.

This allows to receive signal 5 to 30 minutes faster than by satellite channel path and start the rescue operation immediately. For example,

Even if take into account that main navigational areas are overlayed by GEO satellites and distress signal is received at first message the time lag nevertheless will be about 5-10 min, or up to 40 minutes near equator. As the device has AIS signal receiving system it is obvious that center operator immediately sees the distressed object nearest vessel and give instructions for vessel rescue operation via VHF connection.

Certification and check system

The device allows to carry out the annual or regular EPIRB operation check procedure in volume of IMO requirements by reception and check of all beacon’s parameters.

SBM 406 allows to check EPIRB on air that clearly demonstrates and confirms product operation and saves IMO required annual test time for the shipowner. Port authorities are able to issue EPIRB operation check certificate by themselves and contribute it to the port facilities cost.

Device allows to locate and process all false emergency signals on local area and gives the right to port authorities to contribute penalty charges for false distress signal in accordance with Cospas-Sarsat recommendations. 

Complete set

System includes main data receiving unit, antenna cable and fixed antenna for outdoor attachment. Main unit can be connected to PC by means of USB cable. Specifically developed software runs automatically for further data processing. System receives and decodes all the Cospas-Sarsat signals. 

The standard complete set includes the software which allows to display the beacons with built-in GPS on most marine cartography solutions. The advanced set has AIS receiver and software for data processing received from vessels equipped with AIS (class B and A).

System provides the possibility to create a receiver’s network using Enternet protocol for wide area network covering.
 

Main characteristics:

Receiver has an option to receive any signals on the frequency of 406 MHz: from 406, 022 to 406, 060. It means that any beacon signal will be received including any new beacons that will be produced in the coming years.

• Real time 406MHz beacon monitoring;
• PC connection by USB interface;
• System sensitivity -115 dBm;
• Reception, decoding and displaying the data of all Cospas-Sarsat beacons;
• Test emergency message tracking for 406MHz beacon regular operation check;
• Automatically signal power measurement on 406Mhz channel and distance estimation for beacons without GPS. Positioning and distance measurement for beacons with built-in GPS, GLONASS, GALILEO;
• Complete beacon database;
• Light alarm in case of emergency signal reception;
• All Cospas-Sarsat frequency 406 MHz range monitoring.

 Technical specification:

• SBM 406 power supply - 6-12 V;
• Power input – no more than 30dBm;
• Sensitivity on the frequency of 406 MHz: -115 dBm;
• Dimensions   - 180x120x65 mm;
• Message decoding  – all existed Cospas-Sarsat protocols.

• Receiver unit
• Antenna cable
• Fixed antenna
• USB – USB cable
• Power supply unit
• user manual(English)
• software
• AIS receiver (optional)