| The SART Tester is designed for check of any SART in accordance with the requirements of SOLAS - 74/88, and the Russian Marine Register rules M.628-2.
The SART Tester allows to:
- measure the carrier frecuency of response in range of 9140...9560 MHz;
- measure the duration of response in range of 50...150 microseconds;
- indicate the power level in range of 300...950 mW;
- calculate the quantity of sweep frecuency points in the response;
- control the power supply voltage with displaying on LCD;
- print the full protocol of the device test |
Measurements of SART parameters are made thought the broadcast. The International Marine Organisation requires that all GMDSS radio equipment is maintained to ensure it meets the appropriate perfomance requirements. In the event of test failure, ships may be detained in port.
Now with the help of SART Tester it is possible to test the SART to ensure it meets the appropriate perfomance requirements The SART Tester is portatible and easy in use. It is far more effective than the primitive self-test function offered by any SART.
The Test results shown on LCD Display or printered make easy the futher analysis of the SART efficiency.
The SART Tester provides measurement of the carrier frequency, duration and power of the response. The device has small dimention and can be easily placed in hand.
The device has two power suplly modes:
- inside 6V accumulator with current consumption 270 mA
- onboard power network +24V through power suplly unit
|
